FDC-77735-B90D-EC(Fully Automatic W/L and L/L 90 Degree Corner Fitted Sheet Sewing Unit)

Description

The fabric is fed from one roll via let-off through tension control and edge guiding to the length hemming section (with elastic insertion). The fabric going through an accumulator will be measured, cross-cut, and transferred to the cross hemming section (with elastic insertion). After the 4 sides hemming operations, the fabric is performed with the side drop forming system. Then 4 double clamp systems transfer the fitted sheet box to the corner sewing section, consisting of 1 right and 1 left overlock sewing head, where the corners are sewn 90 degrees with automatic latch tack (with or without label). The sewn fabric is transferred to the bar tacking sewing heads to secure the 4 corners. Then the finished fitted sheet will be placed on an exit conveyor. It is possible to apply a flat or folded label into one corner.

Features

1. Inlet from a roll
2. Mill seam detection
3. Roll joining station for precise feeding
4. Fabric edge guiding and adjustable tension system
5. Adjustable elastic tension devices
6. Elastic inserted inside a full hem
7. Servo measuring and cutting section
8. Multi-axis side drop forming system with corner clamps
   and fabric edge sensing devices
9. 90 Degree servo vertical and rotational drive section
   with multi-axis clamp conveyor system
10. Automatic flat and/or loop label insertion
11. Latch tack corner sewing section
12. Bar tacking sewing section to secure corners
13. Vacuum waste removal system
14. Simple data programming with color touch screen
    operator interface
15. Remote access for troubleshooting capability

Options

1. Inlet from an A-Frame or pallet with an undoubling device
2. Extra label feeder inserted in the corner
3. Stacker designed to feed:
   – a table on wheels; or
   – a bundle conveyor; or
   – an exit conveyor to an Overhead Rail System; or
   – an exit conveyor in-line to an Automatex folding unit